HP StorageWorks XP Remote Web Console Software - Manual (Page 13)

XP Data Shredder user guide 13
Shredding Data Output pane
When you specify volumes in the Shredding Data Output pane during a Shredding operation, the results
of the operation are saved in files.
Figure 4 Shredding Data Output pane
The Shredding Data Output pane contains the following:
• non-object Volume
Results of shredding volumes in this list are not saved in files.
• object Volume
Results of shredding volumes in this list are saved in files.
Each row represents one volume. Each volume is represented by a CU number (left of the colon) and
LDEV number (right of the colon).
• Add
Moves volumes selected in the non-object Volume list to the object Volume list.
• Delete
Moves volumes selected in the object Volume list to the non-object Volume list.
• OK
Save the settings and close the Shredding data output pane.
Shredding operations
Shredding operations proceed as follows:
• Display the Volume Management pane (see ” Starting Data Shredder ” on page 10 and the
HP StorageWorks LUN Configuration and Security Manager XP User Guide for the specific disk array.
• Prepare for Shredding operations (see ” Preparing for Shredding operations ” on page 14).
• Define Shredding operation settings (see ” Shredding Param pane ” on page 11 and ” Defining
Shredding operation settings ” on page 14).
• Perform Shredding operations (see ” Deleting data on volumes (Shredding) ” on page 15).
NOTE: To quit shredding operations, see ” Canceling Shredding operations ” on page 16.
Preparing for Shredding operations
Before performing shredding operations, change the status of the target volume to Blocked.