HP StorageWorks XP Remote Web Console Software - Manual (Page 11)

TrueCopy for z/OS user guide 11
About this guide
This guide provides information about:
• ” Overview of TrueCopy Operations ” on page 17
• ” Preparing for TrueCopy Operations ” on page 43
• ” Starting TrueCopy ” on page 59
• ” Performing TrueCopy Configuration Operations ” on page 60
• ” Performing TrueCopy Pair Operations ” on page 109
• ” TrueCopy Disaster Recovery Operations ” on page 134
• ” Troubleshooting ” on page 141
• ” Using PPRC Commands for TrueCopy ” on page 147
• ” Pinned Track Recovery for TrueCopy Volumes ” on page 172
• ” SIM Reporting ” on page 172
• ” TrueCopy Scripting ” on page 176
• ” HXRC Device Blocking and Load Balancing ” on page 201
Intended audience
This guide is intended for customers and HP authorized service providers experienced with the following:
• Disk array hardware and software
• Storage systems
Prerequisites
Prerequisites for using this product include:
• XP12000 firmware version
• Minimum: 50-04-31-00/00
• Recommended: 50-04-41-00/00 or later
• XP10000 firmware version
• Minimum: 50-04-31-00/00
• Recommended: 50-04-41-00/00 or later
• XP1024/XP128 firmware version
• Minimum: 21-13-02-00/00
• Recommended: 21-14-10-00/00 or later
• Set up the HP StorageWorks XP disk arrays
• See the
readme.txt
file on the product CD for last-minute announcements
Related documentation
In addition to this guide, please refer to other documents for this product:
• HP StorageWorks Command View XP User Guide for XP Disk Arrays
• HP StorageWorks XP Remote Web Console User Guide for XP12000/XP10000
• HP StorageWorks XP Remote Web Console User Guide for XP1024/XP128
• Hitachi HPAV for z/OS® User Guide
• Planning for IBM® Remote Copy
These and other HP documents can be found on an HP web site: http://www.hp.com/support/ .