HP StorageWorks XP Remote Web Console Software - Manual (Page 222)

NOTE:
If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group
that consists of one or more external LUs.
NOTE:
If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group
that consists of one or more virtual volumes (V-VOLs).
• Emulation: Emulation type of the CVS volume to be initialized.
• Capacity: Capacity of the CVS volume to be initialized, either in MB for open-system volumes
or cylinders (Cyl) for mainframe volumes.
• CU:LDEV: CU:LDEV number of the CVS volume to be initialized.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
NOTE:
If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume (V-VOL).
For more information about virtual volumes, see the
HP StorageWorks Snapshot XP user guide.
• Back: Returns to the Volume Initialize pane (1) or Volume Initialize pane (2).
• OK: Registers the Volume Initialize settings, and returns to the Customized Volume pane.
• Cancel: Cancels the Volume Initialize settings, and returns to the Customized Volume pane.
Concatenation List pane
In the array, data can be written to an LDEV that extends over concatenated parity groups.
Concatenation of parity groups enables faster access to data. The Concatenation List pane displays
concatenated parity groups.
Custom Volume Size operations 222