HP StorageWorks XP Remote Web Console Software - Manual (Page 157)

NOTE: When you right-click the Preview list, you will find a command named Modify. This
command is grayed out and, therefore, cannot be used.
6. Click Apply to apply the changes.
NOTE: If an error occurs, the right-most column of the Preview list displays the error code.
To view detailed information about the error, right-click the error code and then select Error
Detail. An error message appears and gives you detailed information about the error.
Figure 69 List in the Optional Operations Window Showing Whether to Report SIMs from CUs to
Host
•
CU: Displays CU numbers.
•
SIM Report: Indicates whether to report SIMs from CUs to hosts.
Clearing Service Information Messages (SIMs)
SIMs (service information messages) are messages that are sent from an XP disk array to hosts.
For example, SIMs are sent when a failure occurs. For detailed information about SIMs, see
“Checking Service Information Messages (SIMs)” (page 242) .
SIMs that are sent to hosts are also saved in the SVP. To clear all Universal Replicator for Mainframe
SIMs from the SVP, follow the procedure below:
CAUTION: If you follow the procedure below to clear all Universal Replicator for Mainframe
SIMs, XP Continuous Access SIMs will also be cleared at the same time. You cannot delete only
Universal Replicator for Mainframe SIMs. The SIMs of the entire storage system will be cleared.
To clear all SIMs:
1. Ensure that the Remote Web Console main window is in Modify mode.
For detailed information about how to do this, see the HP StorageWorks XP24000/XP20000
Remote Web Console User's Guide.
2. Ensure that the Optional Operation window is displayed.
3. Click Clear SIM in the upper-right corner of the window.
A message appears and asks if you want to delete SIMs.
4. Click Yes to delete SIMs.
Managing SIMs 157