HP StorageWorks XP Remote Web Console Software - Manual (Page 118)

is blank if the volume in the local storage system is neither a primary data volume nor a
secondary data volume.
•
S/N(LDKC) : The serial number of the remote storage system. This column is blank if the volume
in the local storage system is neither a primary data volume nor a secondary data volume.
The column can be blank while the pair is in transition to the Simplex status. To view the latest
information in this column, refresh the screen.
•
CTRLID(Model Name): The serial number and the controller ID of the remote storage system.
The model name is enclosed by parentheses. The controller ID for an XP24000/XP20000
Disk Array is 5. The column can be blank while the pair is in transition to the Simplex status.
To display the latest information in this column, refresh the screen.
•
Paired VOL: A data volume in the remote storage system. This column indicates a primary
data volume if the remote storage system is a primary storage system. This column indicates
a secondary data volume if the remote storage system is a secondary storage system. This
column is blank if the volume in the local storage system is neither a primary data volume nor
a secondary data volume. An LDEV number ending with # indicates the volume is an external
volume. For detailed information about external volumes, see the HP StorageWorks
XP24000/XP20000 External Storage Software User's Guide. If a volume is a volume of an
XP12000/XP10000 Disk Array or XP24000/XP20000 Disk Array, 00 is displayed for the
LDKC number.
•
Pair JNLG: The journal group number for the remote storage system. This column is blank if
the volume in the local storage system is neither a primary data volume nor a secondary data
volume.
•
CTG: The consistency group number. This column is blank if the volume in the local storage
system is neither a primary data volume nor a secondary data volume.
•
Err Lv.: The range of pair split on error.
Group: If an error occurs with this pair, all the pairs in the mirror where this pair belongs
will be split. ◦
◦ Volume: If an error occurs with this pair, only this pair will be split.
•
Sync.: If the volume in the local storage system is a primary data volume, this column shows
the progress of an initial copy operation. If the volume in the local storage system is a secondary
data volume, this column displays information in the following ways:
◦ If the volume pair is not split, this column displays nothing.
◦ If the volume pair is split and, therefore, is in Suspend status, this column usually displays
the synchronization rate (that is, concordance rate) between the secondary data volume
before it became split and the secondary data volume after it became split. For example,
118 Using the Universal Replicator for Mainframe GUI