HP StorageWorks XP Remote Web Console Software - Manual (Page 198)

•
Set: Applies the settings to the Preview list in the Pair Operation window ( “Pair Operation
Window” (page 116) ).
•
Cancel: Discards the settings.
Displaying Detailed Information about a Pair of Data Volumes
The Detailed Information window allows you to view detailed information about a pair of data
volumes.
To display detailed information about a pair of data volumes, follow the procedure below. Not
only the primary storage system administrator but also the secondary storage system administrator
can perform this operation.
1. Ensure that the Pair Operation window is displayed.
2. In the tree of the Pair Operation window, select and right-click a pair.
NOTE: You cannot select more than one pair.
3. From the pop-up menu, select Pair Status.
4. In the Detailed Information window ( Figure 81 (page 198) ), view detailed information about
the pair.
5. After you finish viewing the information, select Close to close the Detailed Information window.
Figure 81 Detailed Information Window
198 Performing Pair Operations