HP StorageWorks XP Remote Web Console Software User Manual
Page 154
Figure 68 DKC Status Window
The DKC Status window displays the following settings:
•
List:
No.: displays serial numbers used for rows in the list
◦
◦
Path Status: indicates status of a logical path (for details, see
◦
Port: indicates a port on the local storage system
◦
Pair-Port: indicates a port on the remote storage system.
•
S/N: Indicates the serial number and LDKC number of the remote storage system.
•
Controller ID: Displays the controller ID (model name that indicates the model) of the remote
storage system.
•
Path Gr. ID: Indicates a path group ID.
•
M-R Path: Indicates the type of channel interface between the local and the remote storage
systems. This column displays fibre.
•
Minimum Paths: Indicates the minimum possible number of paths between the local and the
remote storage systems.
•
RIO MIH Time: Indicates the RIO MIH (remote I/O missing interrupt handler) timer value, which
is the wait time until data transfer from the local storage system to the remote storage system
is complete.
•
DKC Registered: Indicates the date and time when the local and the remote storage systems
are associated with each other.
•
Last Updated: Indicates the date and time when the last operation on a logical path to the
remote storage system was performed.
•
Refresh the DKC Operation tab after this panel is closed: If you select this check box, information
in the DKC Operation window will be refreshed after you close the DKC Status window.
•
Refresh: Refreshes the information in the DKC Status window.
•
Close: Closes the DKC Status window.
154 Configuring Storage Systems and Logical Paths