Capacity, Volume type and capacity in ldev information – HP StorageWorks XP Remote Web Console Software User Manual
Page 75
Description
Item
Allows you to select the type of volume capacity information from the Volume Type list:
Volume Type
•
Total Volume: information on the all the volumes is displayed.
•
Internal Volume Only: information only on the internal volumes is displayed.
•
External Volume Only: information only on the external volumes is displayed.
Capacity in MB when the Total Volume Capacity is 10 GB or less, and in GB when the
Total Volume Capacity is more than 10 GB. The percentages (%) of the capacities relative
to total capacity are shown in parentheses.
Capacity
When selected, shows the volume capacity information (capacity by volume type, pie
chart, total capacity) on open system volumes in the storage system. The information does
not include the capacity of V-VOL. When there is no open system volume, No Volume
appears.
See
Open Volume Capacity Pie Chart
for the capacity pie chart when OPEN Volume is
selected.
OPEN Volume
When selected, shows the volume capacity information (capacity by volume type, pie
chart, total capacity) on zSeries , S/390 (mainframe), and multiplatform volumes in the
storage system. The information shown does not include the capacity of V-VOL. When
there is no zSeries and S/390 volume, No Volume appears.
See
Mainframe Volume Capacity Pie Chart
for the capacity pie chart when Mainframe
Volume is selected.
Mainframe
Volume
Figure 28 Volume Type and Capacity in LDEV Information
Capacity
•
The button displays the volume capacity information (capacity by volume type, pie chart, total
capacity) on open system volumes in the storage system. The displayed information does not include
XP24000/XP20000 Remote Web Console User's Guide
75