HP StorageWorks XP Remote Web Console Software - Manual (Page 69)

For CV volumes, CVS appears on the right of the emulation type.
For LUSE volumes, an asterisk (*) and a number appear on the right of the emulation type. For
example, OPEN-9*3 indicates that three OPEN-9 volumes are combined.
• Capacity: Logical volume's size.
• RAID: Logical volume's RAID level.
If the logical volume is an external LU or virtual volume, the RAID column displays a hyphen (-)
instead of a RAID level.
• Parity Group: Parity group's name.
If the name begins with E, the group is an external LU group consisting of one or more external
LUs.
If the name begins with V, the group is a V-VOL group consisting of one or more virtual volumes.
• Paths: Number of alternate paths, if any.
• VMA: Access Attribute: Displays the access attribute of each logical volume. If a VMA is set on a
logical volume, VMA: appears at the beginning of the access attribute. If extents are set on a lo-
gical volume, by Data Retention Utility, VMA(Ext): appears at the beginning of the access attribute.
The number of logical volumes selected in the table appears below the table.
NOTE:
The LDEV table does not contain volumes reserved by Auto LUN XP.
Buttons
• Add WWN: Registers host bus adapters in a host group. Before using this button, you must select
a host group in the LU Path tree, and select host bus adapters (WWNs) in the WWN name table.
NOTE:
If you select an item related to NAS or iSCSI ports, you cannot use the Add WWN button.
• Add iSCSI name: Registers host bus adapters in an iSCSI target. Before using this button, you must
select an iSCSI target below the iSCSI folder in the LU Path tree, and select host bus adapters
(iSCSI names) in the iSCSI name table.
NOTE:
If you select an item related to Fibre Channel or NAS ports, you cannot use the Add iSCSI name
button.
• Add LU Path: Defines LU paths to logical volumes. Before using this button, you must select LUNs
in the LU Path tree and select logical volumes in the LDEV table.
• Apply: Applies settings in the pane to the array.
• Cancel: Cancels settings in the pane.
XP LUN Configuration and Security Manager User Guide 69