Nas channel adapters – HP StorageWorks XP Remote Web Console Software User Manual
Page 52
52
Overview of LUN Manager
For more information about configuring hosts, see the documentation for the operating system and iSCSI
driver in your environment.
Authentication of iSCSI targets (performing mutual authentication)
When authentication of a host succeeds, the host performs authentication of the iSCSI target in reverse if
the host requires (mutual authentication). In authentication of iSCSI targets, when the user information
(user name and secret) of the iSCSI target specified on the iSCSI target side matches the user information
stored on the host, the host allows the iSCSI target to connect.
For more information about iSCSI target settings to perform authentication of iSCSI targets, see
Specifying an iSCSI target’s user information (when performing mutual authentication)
For more information about configuring hosts, see the documentation for the operating system and iSCSI
driver in your environment.
NAS channel adapters
You can use LUN Manager to check the running status of the OSs on NAS channel adapters. Also, when
a failure occurs in the OS, you can operate (restart, stop, or start) the OS using LUN Manager without
going to the array’s cabinet. For instructions on checking the OS status on NAS channel adapters and
operating the OSs, see ”