HP StorageWorks XP Remote Web Console Software User Manual
Page 39
Figure 25 Add New WWN Dialog Box (When Registering a Host that Has Previously been Connected
to the Storage System)
Figure 26 Add New WWN Dialog Box (When Registering a Host that Has Never been Connected
to the Storage System)
NOTE:
If the WWN list (located near the lower-left corner of the window) includes a host that
you want to register, you can register the host by dragging the host from the WWN list to the
desired host group in the tree.
Defining LU Paths by Associating Host Groups to Logical Volumes
Use LUN Manager to define LU paths by associating host groups with logical volumes. For example,
if you associate a host group consisting of three hosts with logical volumes, LU paths are defined
between the three hosts and the logical volumes.
NOTE:
When you use a logical volume larger than 2 TB, whether the host can access a logical
volume larger than 2 TB depends on the operating system of the host.
The following operating systems support a logical volume that is larger than 2 TB.
•
AIX 5.2 TL08 or later
•
AIX 5.3 TL04 or later
•
Windows Server 2003 SP1 or later
•
Red Hat Enterprise Linux AS 4 Update 1 or later
If you use other operating system than these, make sure that a logical volume is not larger than 2
TB. For information about the maximum value of a logical volume capacity supported by your
operating system, contact the vendor of your operating system.
To define LU paths:
Defining Fibre Channel LU Paths
39