HP StorageWorks XP Remote Web Console Software User Manual
Page 59
NOTE:
The change in the dialog box will not affect any port that satisfies one of the following
conditions:
•
The resulting nickname is already used as the nickname of a host bus adapter connected
to the port.
•
The resulting WWN exists in the port.
8.
Click the OK button to close the Change WWN & Name dialog box. If a message appears
and asks if you want to continue the operation, click the OK button.
The changes are indicated in blue in the tree.
NOTE:
If you check Apply this change to other ports, too and click the OK button, a dialog
box appears (
) and lists the host bus adapters to be changed. To make changes,
click the OK button. If not, click the Cancel button.
9.
Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the changes to the storage system.
10.
Click the OK button to close the message.
The changes are applied to the storage system.
Figure 39 Change WWN & Name Dialog Box
Changing the Fibre Channel LU Path Settings
59