HP StorageWorks XP Remote Web Console Software User Manual
Page 43
Advertising
Figure 28 Flow of Authentication of Hosts (In a Fibre Channel environment)
Each case in the flow is explained as follows. Case A to Case D in
corresponds that
below.
•
When performing authentication of host groups
If the user information for the host is registered on the host group, and authentication of
the host is enabled (Case A):
The host group authenticates the user information sent from the host. If the authentication
of the host successes, either of the following actions occur:
◦
–
When the host is configured for mutual authentication, the processing will go on to
authentication of the host group, next.
–
When the host is not configured for mutual authentication, the host will connect to
the storage system.
Setting Fibre Channel Authentication
43
Advertising