Deleting pools, Deleting a pool – HP StorageWorks XP Remote Web Console Software User Manual

Page 68

Advertising
background image

4.

Select the value for the threshold from the Threshold drop-down list.

In the drop-down list, only the values that are higher than the pool usage rate are displayed.

5.

Click OK.

The Change Pool Information dialog box closes.

6.

Click Apply.

The confirmation message indicating if it is OK to apply the setting to the storage system is
displayed.

7.

Click OK.

The confirmation message closes and the change of the setting is applied to the subsystem.

Figure 16 Change Pool Information Dialog Box

The items in the Change Pool Information dialog box are the same as those of the New Pool dialog
box. However, in the Change Pool Information dialog box, you cannot enter or select items other
than the Threshold drop-down list.

Deleting Pools

Usually, you specify one pool and delete only the specified pool. However, you may delete multiple
pools at the same time, if necessary. This section describes the procedures for when you delete
one specified pool and when you delete multiple pools at the same time.

Deleting a Pool

To delete a pool:
1.

Change the mode of the Remote Web Console to Modify.

If the mode is already changed to Modify, you can skip this step. For information on how to
change the mode, see the HP XP24000/XP20000 Remote Web Console User Guide.

2.

Select and right-click the pool you want to delete in the Pool tree of the Pool window. A menu
is displayed. If the amount of the pool capacity that is used is other than zero (0) GB, the
menu will not be displayed.

3.

Select the Delete Pool command from the menu. A confirmation message is displayed
asking if it is OK to delete the selected pool.

4.

Click OK. The icon of the selected pool changes to the icon which indicates the deleting
process.

5.

Click Apply. The confirmation message indicating if it is OK to apply the setting to the storage
system is displayed.

6.

Click OK. The confirmation message closes, and the deletion of the pool is applied to the
storage system.

68

Performing XP Snapshot Operations

Advertising