HP StorageWorks XP Remote Web Console Software - Manual (Page 52)

Table 27 The XP Snapshot Window Display (continued)
Description Item
•
Pool: X : pool whose usage rate exceeds the
threshold (X indicates pool ID)
•
Pool: X : blocked pool (X indicates pool ID)
If you select Subsystem in the tree, the pool/volume list
displays the list of the pools in the storage system. When Pool/volume list (in the upper right portion of the window)
you select Subsystem in the tree, the following items will
be displayed in the pool/volume list.
•
Pool ID: pool ID
• Capacity(GB): storage capacity of the pool
•
Used Capacity(GB): capacity of the pool that is used by
the XP Snapshot pairs
• Usage rate: usage rate of the pool
•
Pool-VOL(s): total number of the pool-VOLs in the pool
• XP Snapshot pair(s): total number of snapshot data
stored in the pool
If you select a pool icon in the tree, the pool/volume list
displays the list of the XP Snapshot pairs in the pool. When
you select a pool icon in the tree, the following items will
be displayed in the pool/volume list.
•
P-VOL: port ID, the group number of the host group,
and LUN (LDKC number, CU number, and LDEV number
of the volume) of the P-VOL.
For P-VOL LUs with more than one path, only one path
is listed. The path is connected to the first port within
the ports configured to a path that is shown in the tree
view of the Pair Operation Window.
•
MU: snapshot ID
• Status: status of the XP Snapshot pair
•
S-VOL: port ID, the group number of the host group,
and LUN (LDKC number, CU number, and LDEV number
of the volume) of the S-VOL.
For S-VOL LUs with more than one path, only one path
is listed. The path is connected to the first port within
the ports configured to a path that is shown in the tree
view of the Pair Operation Window. When the volume
is unmounted, dotted lines (- - -) will display.
• Pool used(GB): capacity of the pool that is used by the
S-VOL
•
Sync.: consistency rate of the data of the P-VOL and the
S-VOL
• CTG: consistency group number of the XP Snapshot pair
When the consistency group is not specified, dotted
lines (- - -) will display.
X indicates the capacity of the pool association information
in use. Pool Association Inf.: X GB / Y GB
Y indicates the maximum possible capacity of the pool
association information, including the capacity of the pool
association information in use.
The maximum possible capacity of pool association
information is calculated, based on the assumption that the
remaining space of the V-VOL management area is used
as pool association information. If the remaining space of
52 Using the XP Snapshot GUI