HP StorageWorks XP Remote Web Console Software - Manual (Page 152)

3. Go to the LightPulse™ Utility to open the LightPulse Utility/NT pane.
Figure 75 LightPulse Utility/NT pane
.
If you do not have a shortcut to the Utility, do the following:
a. Go to the Start menu, select Find, and choose Files and Folders. The Find pane opens.
b. In the Named field, enter lputilnt.exe.
In the Look in box, choose the hard drive containing the Emulex mini-port driver.
c. Click Find Now to search for the LightPulse Utility.
NOTE:
If you cannot find the LightPulse Utility, contact Emulex technical support.
d. In the Find: Files named list box, select lputilnt.exe, and press Enter. The LightPulse Utility/NT
pane appears.
4. In the list on the left of the pane, verify that the installed adapters appear.
5. In the Category list, select Configuration Data. In the Region list, select 16 World-Wide Name.
The selected adapter's WWN appears in the list on the right of the pane.
Finding WWNs in Sun Solaris environments
HP currently supports the JNI Fibre Channel adapter in Sun Solaris environments. This information
will be updated as needed to cover future adapter-specific information as those adapters are supported.
For more information about Fibre Channel adapter support, or if you are using a Fibre Channel
adapter other than JNI, contact you HP account support representative for instructions for finding the
WWN.
1. Verify that the fibre adapters and Fibre Channel device drivers are installed.
2. Login to the Sun Solaris host with root access.
Finding an open-system host's World Wide Name (WWN) 152