HP StorageWorks XP Remote Web Console Software - Manual (Page 67)

Performance Control XP user guide 67
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a < … < CL4-r
For example, you can specify URLU CL1-C.01:CL2-A.01, but you cannot specify
URLU CL2-A.01:CL1-C.01
. Also, you can specify URLU CL1 C.01:CL1 C.03, but you cannot
specify URLU CL1-C.03:CL1-C.01.
If port-name.host-group-id is not specified, the monitoring data of all the LU paths will be
exported.
URLDEV
Δ[[CU-id]:[CU-id]][Δ...]
Use this operand when you want to export statistics about remote copy operations, which are
displayed in the CAXJ Monitor pane and the URz Monitor pane. By using this operand, you can export
monitoring data about remote copy operations performed by Continuous Access XP Journal and
Universal Replicator for z/OS at logical volumes controlled by each CU. When statistics are exported
to a ZIP file, multiple ZIP files whose names are beginning with
URLDEV_
will be output. For details on
the statistics exported by this operand, see Table 18 on page 44.
When you specify variables CU-id, you can narrow the range of CUs that control the logical volumes
whose monitoring data are to be exported. CU-id is an ID of a CU. The colon (:) indicates a range.
For example, 00:05 indicates CUs from 00 to 05.
Ensure that the CU-id value on the left of the colon is smaller than the CU-id value on the right of the
colon. For example, you can specify URLDEV 00:05, but you cannot specify URLDEV 05:00.
If CU-id is not specified, the monitoring data of all the logical volumes will be exported.
Example
The following example exports statistics about host bus adapters and SPM groups. This example also
exports statistics in the Physical tab of the Auto LUN XP pane:
The following example exports statistics about three ports (CL1-A, CL1-B, and CL1-C):
The following example exports statistics about six ports (CL1-A to CL1-C, and CL2-A to CL2-C)
The following example exports statistics about the parity group 1-3:
The following example exports statistics about the parity group 1-3 and other parity groups whose ID is
larger than 1-3 (for example, 1-4 and 1-5):
The following example exports statistics about the external volume groups E1-1 to E1-5:
The following example exports statistics about the parity group 1-3 and other parity groups whose ID is
smaller than 1-3 (for example, 1-1 and 1-2):
group PortWWN
group PPCG
group Physical
group Port CL1-A:CL1-C
group Port CL1-A:CL1-C CL2-A:CL2-C
group PG 1-3:1-3
group PG 1-3:
group PG E1-1:E1-5
group LDEV :1-3