Figure 78 luse configuration, Volume manager guidelines, 78 luse configuration – HP StorageWorks XP Remote Web Console Software User Manual
Page 128: Figure 78, Volume manager, Guidelines
128 Overview of Volume Manager and Custom Volume Size
Before the host can access each LDEV composing an expanded LU (LUSE volume), you must release the
expanded LU.
Figure 78
LUSE configuration
Volume Manager guidelines
The following are the specifications and restrictions on LDEVs used to configure a LUSE volume:
•
Open volumes (OPEN-3, OPEN-8, OPEN-9, OPEN-E, OPEN-L, and OPEN-V) are supported.
•
The number of LDEVs combined into a LUSE volume must be within the range of 2 to 36.
NOTE:
The number of expanded LUs (LDEVs) should not exceed 36, even if the LUSE volume
contains another LUSE volume.
•
The emulation type of LDEVs combined into a LUSE volume must be the same.
•
The RAID level of LDEVs that are to be combined into LUSE volumes should be the same.
(Recommended).
NOTE:
Combining RAID-1 and RAID-5 volumes into the same LUSE volume is supported, but not
recommended.
•
LDEVs or LUSE volumes to be combined must not have assigned path definitions. For this reason,
TrueCopy for z/OS®, Continuous Access XP, ShadowImage for z/OS, Business Copy XP, and
Continuous Access XP Journal pair volumes cannot be targets of Volume Manager operations (see
Volume Manager operations using a path-defined LDEV
•
LDEVs to be combined into LUSE volumes must not be reserved for Auto LUN XP.
•
When combining a LUSE volume with another LUSE volume, the range of LDEVs should not overlap.
NOTE:
If you combine LDEV00, LDEV03, and LDEV05 into LUSE 1, combine LDEV02 and
LDEV04 into LUSE 2,and combine LDEV06 and LDEV07 into LUSE 3, you can also combine
LUSE 1 and LUSE 3. However, you cannot combine LUSE 1 and LUSE 2, because the LDEV range
in LUSE 1 and LUSE 2 overlap.
•
The maximum capacity of a LUSE volume is 60 TB.