HP StorageWorks XP Remote Web Console Software - Manual (Page 20)

20 LUN Security XP Extension panes
Figure 7 The Extent List
The extent list provides the following:
• Extent ID: Extent numbers. Extents are indicated by the following icons.
• Attribute: The extent’s access attribute.
• LBA: The number on the left of the hyphen indicates the extent’s starting address. The number on the
right of the hyphen indicates the extent’s ending address.
• Capacity: The extent’s capacity. The unit is megabytes (MB) and the capacity is shown to two decimal
places. An extent’s minimum capacity is 8 MB.
• Retention Term: The period (in days) when you cannot change the access attribute to Read/Write.
When you cannot change the access attribute indefinitely, Unlimited appears. When the access
attribute is Read/Write, a hyphen (-) appears.
NOTE: You can use RAID Manager XP to extend the extent’s retention term, but not shorten the
retention term. For more information, see the HP StorageWorks RAID Manager XP User’s Guide.
• Status: Status of shredding extents. Shredding appears when shredding is being performed. If the
shredding fails, Shredding Failed appears. When shredding is not performed, a hyphen (-) appears.
You need RAID Manager XP to shred extents.
• Progress: Progress of shredding extents. When no shredding process is running, a hyphen (-) appears.
Table 3 Extent icons
Icon Description
Extents that have the Read/Write attribute.
Extents that have the Read Only attribute.