HP XP20000XP24000 Disk Array - Manual (Page 52)

Description Item
Displays the SIM severity level. PP Status is displayed if a SIM occurs related to a program
product license because the license is expired or the licensed capacity is insufficient.
However, only the storage administrator with the Storage Administrator role set to Enable
will be able to see the display.
PP Status can display any of the following SIM severity level statuses:
•
•
•
•
•
If PP Status : Normal is displayed, no SIM has occurred. If any other status is displayed,
view either the License Key window or the Alerts window to identify which program
product has a problem. You may find that you need to consider purchasing the license.
When multiple SIMs occur, only the SIM with the highest severity is displayed. For the
difference between SIM severity levels, see
“Alerts Window” (page 67) ).
PP Status
Implements all the changes or settings made on the Remote Web Console main window.
This button is available only in Modify mode.
If you make any changes, the text may be displayed in blue bold italics or an icon may
change (see
“Text Color and Font Type Displayed on Windows” (page 29) ). The changes
are not actually implemented until you click Apply.
Apply button
Cancels the changes or settings made on the Remote Web Console main window. This
button is available only in Modify mode. Cancel button
File Menu
When you click the File menu, the following commands are displayed.
Table 20 File Menu Details
Description Item
Opens the Reports Display dialog box, which displays the basic configuration information
on the storage system. The Reports Display dialog box is displayed as another window
apart from the Remote Web Console main window; therefore, it can be displayed
regardless of the operation of the Remote Web Console options. For details on the Reports
Display dialog box, see
“Reports Display Dialog Boxes” (page 81) .
Reports
Allows you to update the information on the SVP and then display the latest information
on the Remote Web Console main window. When you click this command, all information
displayed on Remote Web Console is reacquired from the storage system; therefore, it
takes time until the processing caused by this command has been completed.
The Refresh All command is available only when you log in as a storage administrator,
and becomes available when you change to Modify mode.
While the update processing caused by the Refresh All command is in progress, the
system status keeps changing and other users are not allowed to operate from the Remote
Web Console windows. Maintenance of the storage system or an SVP operation by an
HP service representative is not allowed either. Therefore, use of the Refresh All command
is not recommended unless error recovery is required.
The information may not display correctly if SVP maintenance is in progress.
Refresh All
52 Using the Remote Web Console GUI