HP StorageWorks XP Remote Web Console Software - Manual (Page 84)

Table 29 List on the Pair Operation Window (continued)
Description Item
The M-VOL fence level of the TrueCopy for Mainframe pair:
data, status, or never. Fence
The differential data setting (bitmap table managed by
cylinder or track). Diff
Consistency group number (00-7F) of the pair (only for
Asynchronous pairs). CTG
Error level (GRP or VOL) of the pair (only for Asynchronous
pairs). ErrLvl
Percentage of completion of the copy operation. Sync
Whether or not the host I/O time stamp is transferred from
M VOL to R-VOL is indicated. This option is only for T/S
TrueCopy for Mainframe pair. For TrueCopy for Mainframe
Asynchronous, it shows nothing.
The status of the preserve mirror when it is associated with
Compatible FlashCopy V2. If Withdraw is displayed, the PM Status
data of target pair volumes are not synchronized despite
of its pair status.
The number and name of the CLPR which the volumes
forming pairs belong to. For further information on CLPR, CLPR
see the HP XP24000/XP20000 Disk/Cache Partition User's
Guide.
NOTE: The S/N, SSID, and Fence columns can be blank while a TrueCopy pair is in transition to the Simplex status.
To display the latest information in these columns, refresh the screen.
Display Filter
The Display Filter dialog box (see “Display Filter Dialog Box” (page 85) ) allows you to control
which volumes are displayed in the list. To open the Display Filter dialog box, click Display Filter
on the Pair Operation window. You must close the Display Filter dialog box to use other dialog
boxes.
When a CU is selected, the CU# setting is not available.
84 Using TrueCopy for Mainframe GUI