HP StorageWorks XP Remote Web Console Software - Manual (Page 115)

4. Click Browse to display the dialog box, and select the license key file (the file extension is plk)
to be used for installing options on the displayed window.
The selected file name is displayed in the File Name text box.
NOTE:
The file name must be up to 200 alphanumeric characters (ASCII codes), except for some
symbols, such as ", \, ;, :, ,, *, ?, <, >, |, /. You need to be careful with the license key file
name.
5. Click Install.
The time taken for installing depends on the number of license key codes that you install. For
example, if you install 30 key codes, it takes about three minutes. If you install 1000 key codes,
it may take more than 60 minutes.
6. Click Apply (or Cancel).
The status of the enabled options changes to Installed.
If installation fails or an error occurs during the installation, a message dialog box appears and
lists the failed options (see
Figure 49 on page 115). To display the error detail in the dialog box,
select the failed option and then click Detail.
Figure 49 Install/Uninstall Error Dialog Box
Enabling Options Automatically
When the licensed capacity exceeds the mounted capacity because of the reduction of disk drives,
or when the licensed capacity exceeds the used capacity because of the reduction of pairs or pool
VOLs, you can automatically enable only the available Remote Web Console options using the
Available button.
XP24000/XP20000 Remote Web Console User's Guide 115