HP StorageWorks XP Remote Web Console Software - Manual (Page 177)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 177
NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For
more information about external LUs, see the HP StorageWorks External Storage XP user guide.
NOTE: If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume
(V-VOL). For more information about virtual volumes, see the HP StorageWorks Snapshot XP user
guide.
• Back: Returns to the Volume Initialize pane (1) or Volume Initialize pane (2).
• OK: Registers the Volume Initialize settings, and returns to the Customized Volume pane.
• Cancel: Cancels the Volume Initialize settings, and returns to the Customized Volume pane.
Concatenation List pane
In the array, data can be written to an LDEV that extends over concatenated parity groups. Concatenation
of parity groups enables faster access to data. The Concatenation List pane displays concatenated parity
groups.
Figure 107 Concatenation List pane
• Parity Group: Displays concatenated parity groups.
NOTE: If a parity group number starts with E (for example, E1-1), the parity group consists of one
or more external LUs.
NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity
group that consists of one or more virtual volumes (V-VOLs).
• OK: Closes the Concatenation List pane.
Format All pane
Use this pane to format all blocked volumes in parity groups in the local and/or external array.