HP StorageWorks XP Remote Web Console Software - Manual (Page 133)

6 Troubleshooting NAS Blade systems that
include external arrays
If your local array is provided with a NAS package, you can configure the NAS Blade system that
includes an external array. This chapter describes procedures to stop the external array for maintenance
and recover the external array from a failure. This chapter consists of the following sections:
• Stopping and restarting external arrays
• Recovery procedures for errors in external arrays
For more information about each procedure, see the following manuals:
• For XP Business Copy, see the HP StorageWorks XP Business Copy user guide for
XP12000/XP10000 Disk Arrays and SVS 200.
• For XP LUN Configuration and Security Manager Software, see the HP StorageWorks XP LUN
Configuration and Security Manager user guide: HP XP12000 Disk Array, HP XP10000 Disk Array,
HP 200 Storage Virtualization System.
• For XP Continuous Access, see the HP StorageWorks XP Continuous Access Journal user guide
for XP12000/XP10000 Disk Arrays and SVS 200.
Stopping and restarting external arrays
Figure 61 shows an example of a NAS Blade system configuration that includes an external array.
The procedures to stop the external array for maintenance and restart the external array after
maintenance to restore the NAS Blade system are described below, referring to
Figure 61 .
XP External Storage Software User Guide 133