HP StorageWorks XP Remote Web Console Software User Manual
Page 19
Notes
Storage array
•
In XP External Storage panes, the arrays appear as “512” and
“48”, respectively.
•
Alternate paths are in Multi mode.
HP StorageWorks XP512/XP48 Disk
Array
•
In XP External Storage panes, the array is a “256”.
•
Alternate paths are in Multi mode.
HP StorageWorks XP256 Disk Array
•
In XP External Storage panes, the array is an “SVS200”.
•
Alternate paths are in Multi mode.
HP StorageWorks 200 Storage Vir-
tualization System
•
In this user guide, the arrays appear as “EVA array”.
•
In XP External Storage panes, the arrays appear as “EVA”.
•
Alternate paths are in Single mode (meaning that dynamic load
balancing across multiple active paths is not enabled).
HP StorageWorks 3000/5000 En-
terprise Virtual Array (Act-
ive/Standby and Active/Active con-
trollers) or HP StorageWorks
4000/6000/8000 Enterprise Virtual
Array (Active/Active controllers)
•
In this user guide, the arrays appear as “MSA array”.
•
In XP External Storage panes, the arrays appear as “MSA”.
•
Alternate paths are in Single mode.
HP StorageWorks MSA1000/1500
(Active/Standby)
•
In this user guide, the array is a “TagmaStore™ USP subsystem”.
•
In XP External Storage panes, the array is a “USP”.
•
Alternate paths are in Multi mode.
TagmaStore™ Universal Storage
Platform subsystem
•
In this user guide, the array is a “TagmaStore™ NSC subsystem”.
•
In XP External Storage panes, the array is an “NSC”.
•
Alternate paths are in Multi mode.
TagmaStore™ Network Storage
Controller subsystem
•
In this user guide, the array is a “TagmaStore™ AMS subsystem”.
•
In XP External Storage panes, the array is an “AMS”.
•
Alternate paths are in Single mode.
TagmaStore™ Adaptable Modular
Storage subsystem
•
In this user guide, the array is a “TagmaStore™ WMS subsystem”.
•
In XP External Storage panes, the array is an “NSC”.
•
Alternate paths are in Single mode.
TagmaStore™ Workgroup Modular
Storage subsystem
•
“Lightning 99xxV series subsystem” indicates the Lightning 9970V
and Lightning 9980V.
•
In this user guide, the arrays appear as “Lightning 9900V subsys-
tem”.
•
In XP External Storage panes, the arrays appear as “9970V” and
“9980V”, respectively.
•
Alternate paths are in Multi mode.
Lightning 9900V series subsystem
•
“Thunder 95xxV series subsystem” indicates the Thunder 9530V,
Thunder 9570V, and Thunder 9580V.
•
In this user guide, the arrays appear as “Thunder 9500V subsystem”.
•
In XP External Storage panes, the arrays appear as “9500V”.
•
Alternate paths are in Single mode.
Thunder 9500V series subsystem
XP External Storage Software User Guide
19