HP StorageWorks XP Remote Web Console Software - Manual (Page 93)

5. Select the internal LDEV that is mapped to the external LU selected in the Device list on the Add
LU window. Enter the following items in the Add LU window:
a. In the ExG box, select an external LU group number.
b. From the Emulation Type list, select an emulation type.
c. In the LDEV box, select the number of volumes to create.
d. Select the IO Suppression mode.
e. Select the Cache Mode.
f. In the Alternate Path box, select the number of alternate paths that are automatically set.
g. In the CLPR box, select the CLPR to be used. To limit the CU selection range, select the Limited
check box.
h. In the CU# list, select the CU number.
i. To map two or more external LU at the same time, select the interval that arranges each
volume in the Interval box.
j. Select one or more external LUs, and select one or more cells in the LDEV map.
When selecting two or more external LUs in the CU:LDEV list, if you select one cell of the
internal LDEV number in the LDEV map, the number of cells automatically selected is the
same as the number external LUs selected in the CU:LDEV list with the selected internal LDEV
first. When Interval is set, mapping is done at intervals of the specified number.
• To map all the external LUs displayed in the CU:LDEV list at one time:
Click Linear, and select an internal LDEV on the LDEV map. The same number of internal
LDEVs as the external LUs listed in the CU:LDEV list are automatically selected on the
LDEV map following the internal LDEV you selected (
Figure 44 ). The LDEV numbers of
the selected XP LDEV are in a series. When Interval is set, the mapping is done at the
specified interval.
Figure 44 Add LU pane (mapping using the Linear button)
.
• To map one external LU to another internal LDEV:
XP External Storage Software User Guide 93