Add volume dialog box – HP XP External Storage Software User Manual
Page 70
10.
Click OK to close the Add Volume dialog box.
•
When the SSID setting is required, the SSID dialog box opens (see
). Go to step
•
When the SSID setting is not required, the Volume Operation window opens. Go to step
11.
In the SSID dialog box, right-click an LDEV for which SSID is not specified, and then click SSID
in the pop-up menu.
The Set SSID dialog box opens.
12.
In the Set SSID dialog box, select a value from the SSID list and click OK.
The selected value appears in the SSID dialog box.
13.
In the SSID dialog box, make the settings to all the LDEVs that you need to set SSID to (repeat
step
and step
).
14.
Click OK to close the SSID dialog box and return to the Volume Operation window.
The settings appear in blue italics.
15.
Verify the settings in the Preview dialog box.
16.
Click Apply in the Volume Operation window.
The settings are applied to the local storage system and the Volume Operation window appears
normally. When an error occurs, an error message appears. Verify the details in the Preview
dialog box.
Add Volume Dialog Box
Use the Add Volume dialog box to view the external volume parameter or LDEV number that is
configured to the LDEVs in the external volume. The Add Volume dialog box automatically opens
when you click the Add Volume (Manual) command in the Volume Operation window.
The Add Volume dialog box shows the list of the external volumes that can be mapped to the local
storage system. To map the external volume, you need to configure the external volume parameter
and the LDEV number. The parameter that you have not configured is shown with a hyphen (-) .
To configure the parameter, click the external volume with the parameter that you have not
configured, and open the other dialog boxes from the Add Volume dialog box. Delete the external
volume if the Add Volume dialog box contains the external volume that you do not want to map.
Figure 24 Add Volume Dialog Box
70
Performing XP External Storage Operations