HP XP Data Shredder Software - Manual (Page 66)

Figure 24 Shredding Data Output Dialog Box
Description Item
The result of shredding the volumes in this list will NOT be
saved in files.
Each row represents one volume. Each volume shows the
LDKC number, the CU number, and the LDEV number,
delimited by a colon (:).
non-object Volume
The result of shredding the volumes in this list will be saved
in files.
Each row represents one volume. Each volume shows the
LDKC number, the CU number, and the LDEV number,
delimited by a colon (:). This list can contain up to three
volumes.
object Volume
Adds volumes to the object Volume list.
Before using this button, you must use the non-object
Volume list to select the volumes that you want to add.
When you click this button, the selected volumes will be
removed from the non-object Volume list and then added
to the object Volume list.
Add
Deletes volumes from the object Volume list.
Before using this button, you must use the object Volume
list to select the volumes that you want to delete. When
you click this button, the selected volumes will be removed
from the object Volume list and then added to the
non-object Volume list.
Delete
Confirms the settings, and closes the dialog box. OK
Select Progress Dialog Box
To open the Select Progress dialog box, click Progress in the Customized Volume window.
If two types of operation are executing at the same time, you can select one operation from the
Select Progress dialog box and display the progress of the selected operation. However, the Format
operation and the Shredding operation cannot execute simultaneously. Therefore, a different Select
Progress dialog box opens, depending on the operations that are executing.
The following operations are available in the different Select Progress dialog boxes:
•
Either Format or Preparing Quick Format as show in Figure 25 (page 67) .
•
Either Shredding or Preparing Quick Format as shown in Figure 26 (page 67) .
66 Using the Virtual LVI/LUN and Volume Shredder GUI