HP XP Data Shredder Software User Manual
Page 54
Description
Item
Allows you to set LDEV numbers for the VLL volume to be
initialized.
•
Select LDKC No.: Select an LDKC number from the list.
The default is 00. The settings of LDEV numbers for the
selected LDKC and CU numbers appear in the Select
LDEV No. table.
•
Select CU No.: Select a CU number from the list. The
default is CU 00. The settings of LDEV numbers for the
selected CU number appear in the Select LDEV No.
table.
•
Interval: When you select more than one volume, use
this list to set the interval between the LDEV numbers
that need to be assigned to the newly created volumes.
The default value is 0. When you select 0, the LDEV
numbers will be assigned consecutively.
The value you specify as the interval between LDEV
numbers counts only the available LDEV numbers and skips
those that are not selectable.
Select LDEV No. area
Shows the settings of LDEV numbers for the CU number
selected in Select CU No.
•
Gray indicates LDEV numbers that are not selectable.
•
White indicates unused LDEV numbers.
•
Blue indicates available LDEV numbers.
You can select an LDEV number from the white LDEV
numbers in the table. When you set the LDEV number, that
LDEV number becomes available and changes to blue.
LDEV numbers that are not selectable may be already in
use or already assigned to the other emulation group
(grouped by 32 LDEV numbers). See
.
Select LDEV No. table
When this check box is selected, you can select the number
of an LDEV that does not exist in the SLPR to which the
parity group does not belong. When the check box is
cleared, you can only select the number of an LDEV in the
SLPR to which the parity group belongs.
This check box is available only when logged in as a
storage administrator and when there are two or more
SLPRs.
CU number of another SLPR is used
Opens one of the following dialog boxes:
•
If the boundary area of the selected LDEV number does
not have an SSID, opens the Volume Initialize dialog
box (2) for setting an SSID.
•
If the boundary area of the selected LDEV number has
an SSID, opens the Volume Initialize (Set SSID) dialog
box.
Next
Cancels the settings for the LDEV, and returns to the
Customized Volume window.
Cancel
Removes an LDKC:CU:LDEV number that is already
assigned. To remove an LDKC:CU:LDEV number, select a
VLL volume number corresponding to the LDKC:CU:LDEV
number that you want to remove, right-click, and then select
Clear.
Clear
54
Using the Virtual LVI/LUN and Volume Shredder GUI