HP XP Data Shredder Software - Manual (Page 53)

Figure 17 Volume Initialize Dialog Box (1)
Description Item
Number of the VDEV to be initialized. The VDEV number
indicates the parity group where the VDEV belongs. For
example, if the VDEV number is 1-1-(1), the VDEV belongs
to a parity group numbered 1-1.
•
A VDEV number starting with E (for example, E1-1-(1))
indicates that the VDEV belongs to a parity group
consisting of one or more external LUs.
•
A VDEV number starting with V (for example, V1-1-(1))
indicates that the VDEV belongs to a parity group
consisting of one or more XP Snapshot virtual volumes
(V-VOLs).
•
A VDEV number starting with X (for example, X1-1-(1))
indicates that the VDEV belongs to a parity group
consisting of one or more XP Thin Provisioning virtual
volumes (V-VOLs).
Parity Group
Information about the VLL volumes to be initialized.
• No.: Setting number of the VLL volume to be initialized
in the table.
•
Emulation: Emulation type of the VLL volume to be
initialized.
• Capacity: Capacity of the VLL volume to be initialized,
in either megabytes (MB) for open-system volumes or
cylinders (Cyl) for mainframe volumes.
•
LDKC:CU:LDEV: LDKC number, CU number, and LDEV
number for the VLL volume to be initialized. The default
is blank.
Normal volume-setting information table
When this check box is selected, VLL volumes of the
3390-3R emulation type appear in the Normal
volume-setting information table on the left side of this
dialog box. When this check box is cleared, VLL volumes
of other than the 3390-3R emulation type appear in the
Normal volume-setting information table.
If the 3390-3R check box appears, you must set the LDEV
number to all VLL volumes that are available, whether the
check box is checked or cleared.
3390-3R
Volume Initialize Dialog Box (1) 53