HP XP Data Shredder Software User Manual
Page 46
Description
Item
Use this area to set LDEV numbers for the VLL volumes you
intend to create.
•
Select LDKC No.: Select an LDKC number from the list.
The default is 00. The settings of LDEV numbers for the
selected LDKC and CU numbers appear in the Select
LDEV No. table.
•
Select CU No.: Select a CU number from the list. The
default is CU 00. The settings of LDEV numbers for the
selected CU number appear in the Select LDEV No.
table.
•
Interval: When selecting more than one volume, this list
allows you to set the interval between the LDEV numbers
that need to be assigned to the newly created volumes.
The default value is 0. When you select 0, the LDEV
numbers will be assigned consecutively.
The value that you specify as the interval between LDEV
numbers counts only the available LDEV numbers and
skips those that are not selectable.
•
Select LDEV No. table: Shows the settings of LDEV
numbers for the CU number selected from the Select CU
No. list. Gray indicates LDEV numbers that are not
selectable, white indicates unused LDEV numbers, and
blue indicates available LDEV numbers. You can select
an LDEV number from the white LDEV numbers in the
table. When you set the LDEV number, that LDEV
number becomes available and changes to blue.
LDEV numbers that are not selectable may already be
in use or already assigned to another emulation group
(grouped by 32 LDEV numbers). See
Select LDEV No. area
When this check box is selected, you can select the number
of an LDEV that does not exist in the SLPR to which the
parity group does not belong. When the check box is
cleared, you can only select the number of an LDEV in the
SLPR to which the parity group belongs.
This check box is available only when logged in as a
storage administrator and when there are two or more
SLPRs.
CU number of another SLPR is used
Returns to the Make Volume dialog box (1).
Back
Opens one of the following dialog boxes:
•
If the boundary area of the selected LDEV number does
not have an SSID, opens the Make Volume (Set SSID)
dialog box for setting an SSID.
•
If the boundary area of the selected LDEV number has
an SSID, opens the Make Volume confirmation dialog
box.
Next
Cancels the settings for the LDEV, and returns to the
Customized Volume window.
Cancel
Removes an LDKC:CU:LDEV number that is already
assigned. To remove an LDKC:CU:LDEV number, select a
VLL volume number corresponding to the LDKC:CU:LDEV
number that you want to remove, right-click, and then select
Clear.
Clear
46
Using the Virtual LVI/LUN and Volume Shredder GUI