HP XP Data Shredder Software - Manual (Page 50)

Figure 15 Make Volume Dialog Box (4)
Description Item
Number of the VDEV to which the VLL volume belongs. The
VDEV number indicates the parity group where the VDEV
belongs. For example, if the VDEV number is 1-1-(1), the
VDEV belongs to a parity group numbered 1-1.
A VDEV number starting with E (for example, E1-1-(1))
indicates that the VDEV belongs to a parity group that
consists of one or more external LUs.
Parity Group
Shows system disk settings on the VLL volume.
• No.: Number of the VLL volume.
•
LDKC:CU:LDEV: LDKC number, CU number, and LDEV
number for the VLL volume.
• Emulation: Emulation type of the VLL volume.
•
Capacity: Capacity of the VLL volume shown in the unit
selected from the Capacity Unit list in the Make Volume
dialog box (1).
•
Option: Shows System Disk if the VLL volume is
configured as a system disk.
System Disk Setting
If you select this check box and then click OK in the Make
Volume confirmation dialog box, the Make Volume dialog
box (4) will not display until you close the Customized
Volume window. Hide this dialog box
(If you select this option, this dialog box will not reappear
until you switch from the Customized Volume window to
another window.)
Configures the selected VLL volume as a system disk. Set
Releases the system disk settings from the selected VLL
volume. Release
50 Using the Virtual LVI/LUN and Volume Shredder GUI