HP XP Business Copy Software - Manual (Page 55)

ShadowImage for z/OS user guide 55
• FlashCopy V2 Relationships: Information about FlashCopy Mirror Version 2 relationships in the volume
list. You can select information displayed in this volume list using the CU list and check boxes below.
• CU list: Select the CU containing volumes you want to display in the volume list.
• Check boxes: Select the type and status of volumes you want to display in the volume list.
Table 16
shows the features of each check box.
• Volume list: Displays information about volumes that form FlashCopy Mirror Version 2 relationships .
You can select volumes displayed in this volume list using the CU list and check boxes.
• OK: Closes the FlashCopy Information pane.
Performing ShadowImage Operations
This section describes SI390 windows and operations.
NOTE: Before performing SI390 operations, check that one or more normally functioning microprocessors
for the CU group 0 exist, otherwise all the commands that change the pair status (e.g. commands that
create or delete a pair) will be rejected and you can only display the windows and reference the pair
status. For information about how to check the status of the microprocessors, please call the Support
Center.
Setting the Reserve Attribute
Use the Set Reserve Attribute window to set the reserve attribute for the volume(s) selected on the
ShadowImage main window. To open the Set Reserve Attribute window, select one or more unreserved
simplex volumes in the Volume List box on the ShadowImage main window, right-click to display the
pop-up menu, and then click Change Reserve.
Table 16 Check Boxes in FlashCopy V2 Relations
Check Box Displayed Information
Source S-VOLs of the FlashCopy Mirror Version 2 relationships
Target T-VOLs of the FlashCopy Mirror Version 2 relationships
Normal Volumes of the FlashCopy Mirror Version 2 relationships in normal status
Failed Volumes of the FlashCopy Mirror Version 2 relationships in abnormal status