HP StorageWorks XP Remote Web Console Software - Manual (Page 131)

Viewing XP Continuous Access Pair Status
The Detailed Information dialog box (see Figure 51 (page 131) ) displays the detailed pair status
information for the selected pair. To open the Detailed Information dialog box, click the Pair
Operation tab, select a CU grouping, CU, port, or host group from the tree, select the desired pair,
right-click, and then click the Detailed Information command.
Figure 51 Detailed Information Dialog Box
P-VOL and S-VOL:
•
Port - GID - LUN (lowest LDEV number for a LUSE pair).
•
Device emulation type.
•
Capacity in MB (to two decimal places).
•
The number of blocks.
If the pound or gate symbol (#) is added to the end of the device ID (00:00:3C #, for example),
the LDEV is an external volume. For details on external volumes, see the HP StorageWorks
XP24000/XP20000 External Storage Software User's Guide.
If an X mark is added to the end of the device ID (00:00:3C X, for example), the LDEV that the
number indicates is a Thin Provisioning virtual volume. For details on virtual volumes, see the HP
StorageWorks XP24000/XP20000 Thin Provisioning Software User's Guide. For P-VOL or S-VOL,
the Port - GID - LUN part displays the port number, the host group number, and LUN of the volume
that you specified in the remote storage system when creating the pair. If you change or delete
the port number, the host group number, or LUN of the volume in the remote storage system,
incorrect information will be displayed in P-VOL or S-VOL. Unless you have any special
Viewing XP Continuous Access Pair Status 131