HP StorageWorks XP Remote Web Console Software - Manual (Page 80)

Figure 42 Option Window
Table 48 Option Window
Description Item
When you mark the check box of an option name, that option will be enabled. If you
clear the check box, that option will be disabled. The only options available for Version Select option(s) box
2 are FCv2 Slower Copy1 and FCv2 Slower Copy2. Swap & Freeze and HOST I/O
Performance are the options for ShadowImage for Mainframe. See the Hitachi
ShadowImage™ for Mainframe User Guide: HP XP24000 Disk Array, HP XP20000 Disk
Array for detailed information about these options.
Even if you have selected the check boxes of other option names, they will not be enabled.
Applies the Version 2 options checked in the Select Option(s) box to the storage system. Apply
Cancels all the options set in the Select Option(s) box. Cancel
FCv2 Window
The FCv2 window displays the state-change-pending (SCP) time that is set on the CUs. The default
setting of the state-change-pending time is 120 seconds, but you may change it by using the FCv2
window.
The state-change-pending, in this case, means a temporary suspension of the write operation from
the host to the Version 2 S-VOL. The period during which the write operation is stopped is called
the state-change-pending time. When you copy data that is stored over several volumes by using
Version 2, the S-VOL will not be overwritten during the time defined as the state-change-pending
time so that the consistency of the data will be maintained.
80 Using the Version 2 GUI