HP StorageWorks XP Remote Web Console Software - Manual (Page 14)

2 Preparing for Version 1 Operations
This chapter describes the requirements and preparations for performing Version 1 operations.
•
Page 14
•
Page 14
•
Page 17
•
Page 17
Requirements for Version 1
You can establish a Version 1 relationship for other than simplex volumes. (page 14) lists other
Version 1 requirements.
Table 8 Requirements for Version 1
Requirement Item
I-2105 Controller emulation type
Volume emulation type •
3390-3, 3390-9, 3390-L, 3390-M
• 3390-3a, 3390-3b, 3390-3c
•
3390-9a, 3390-9b, 3390-9c
•
3390-la, 3390-lb, 3390-lc
• 3390-ma, 3390-mb, 3390-mc
•
3380-3
256-LDEV SSID boundary setting
Version 1 can use a volume whose LDKC:CU:LDEV (logical
DKC: control unit image: logical device ID) is between Available volume
00:00:00 and 00:FE:FF and between 01:00:00 and
01:FE:FF.
Under some environment configurations of the storage system, you may not use some of the
emulation types described in
(page 14) .
•
S-VOL and T-VOL must be established in the same CU image.
•
When the SSID boundary is 64-LDEV, S-VOL and T-VOL must be established in the same CU
image and SSID.
•
When a relationship is established and the SSID boundary is changed from 256-LDEV to
64-LDEV, the SSIDs for T-VOL and S-VOL change and the relationship cannot be deleted from
the host. In this case, you should use the Remote Web Console to delete the relationship from
the ShadowImage for Mainframe window.
•
The SSID boundary of IBM ESS is 256 LDEV.
Calculating the Maximum Number of Version 1 Relationships
When you establish Version 1 relationships, resources called differential tables and pair tables
will be required. The number of available differential tables and pair tables in one storage system
depends on whether additional shared memory is installed. There are several patterns of additional
shared memory for differential tables and pair tables, and you can choose any pattern.
(page 15)
shows the patterns of additional shared memory.
14 Preparing for Version 1 Operations