HP StorageWorks XP Remote Web Console Software - Manual (Page 163)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 163
NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For
more information about external LUs, see the HP StorageWorks External Storage XP user guide.
• CU number of another SLPR is used: When selected, you can select the number of an LDEV that does
not exist in the SLPR to which the parity group does not belong. When cleared, you can only select the
number of the LDEV in the SLPR to which the parity group belongs.
NOTE: The CU number of another SLPR is used check box appears only when you log in as a
storage administrator and when there are two or more SLPRs.
• Back: Returns to Install CV pane (1).
• Next: Opens one of the following panes:
• If the selected LDEV number’s boundary area does not have an SSID, the Install CV pane (3) for
setting an SSID appears.
• If the selected LDEV’s boundary area has an SSID, the Install CV pane (4) appears.
• Cancel: Cancels the LDEV’s settings, and returns to the Customized Volume pane.
• Clear: Removes a CU:LDEV number that is already assigned. To remove a CU:LDEV number, right-click
the CVS volume number corresponding to the CU:LDEV number you want to remove, and select Clear.
Table 38 Emulation groups
Emulation group D-type (overseas PCM) emulation type
Group 1 3390-3, 3390-3A, 3390-3B, 3390-3C, 3390-9, 3390-9A,
3390-9B, 3390-9C, 3390-L, 3390-LA, 3390-LB, 3390-LC,
3390-M, 3390-MA, 3390-MB, 3390-MC
Group 2 3390-3R
Group 4 OPEN-3, OPEN-8, OPEN-9, OPEN-E
Group 6 OPEN-V