HP XP Business Copy Software - Manual (Page 65)

• MU: MU number of a BC cascade pair member volume. For more information about what appears
if you select Snapshot XP pairs, see the HP StorageWorks Snapshot XP user guide.
• Port: Port ID (cluster and channel number) of the first S-VOL of each volume.
• Group (G-ID): Host group of the S-VOL.
• S-Vol Path (LUNS): CU:LDEV (control unit image:logical device ID) of the S-VOL.
NOTE:
An LDEV number ending with # (for example, 00:01#) indicates the LDEV is an external volume.
• Pace: Copy pace for all pairs being created: Slower, Medium, and Faster. For more information
about what appears if you select Snapshot XP pairs, see the HP StorageWorks Snapshot XP user
guide.
• Code: If the specified option in the Preset Volume list is performed by clicking Apply, but the oper-
ation fails, the reason code is displayed.
To perform the specified operations, click Apply on the BC main screen. When all operations are
performed successfully, the Preset Volume list is cleared. However, failed operations remain in the
Preset Volume list. You can also cancel one or all operations by using the following shortcut menu
commands:
• Delete: Cancels the selected operation only. To display the Delete command, select a volume or
pair, and right-click.
• Delete All: Cancels all operations displayed in the Preset Volume list. To display the All Delete
command, deselect any volume or pair, and right-click.
• Detail: Displays the Error window, which lists error code and message for the failed operation.
Performing BC operations
Setting reserve attributes
Use the Set Reserve Attribute window to set the reserve attribute for volumes selected on the BC main
screen. To open the Set Reserve Attribute window, select one or more unreserved SMPL volumes in
the Volume list on the BC main screen, right-click, and click Change Reserve.
Figure 33 Set Reserve Attribute window
.
XP Business Copy User Guide 65