HP XP Business Copy Software - Manual (Page 91)

Troubleshooting When Using XP RAID Manager
When an error has occurred in XP Business Copy Software pair operation using XP RAID Manager,
you might identify the cause of the error by referring to the XP RAID Manager operation log file. The
XP RAID Manager operation log file is stored in the following directory by default.
The log file is stored in: /HORCM/log*/curlog/horcmlog_HOST/horcm.log
Where:
• * is the instance number.
• HOST is the host name.
To identify the cause of the error by using the log file, follow the procedure below. For more information
about XP RAID Manager, refer to the HP StorageWorks XP RAID Manager User's Guide.
1. Open the XP RAID Manager log file, and find the error code.
Example: Error codes appear on the right of the equal symbol (=).
11:06:03-37897-10413- SSB = 0xb9a0,235b
2. See Table 25 on page 91 to locate the meaning of the error code.
Table 25 Error Code and Error Contents When Operating XP RAID Manager
Error Contents Error Code
Error occurred in XP Business Copy Software pair operation. b9a0/b9a1/b9a2
The volume specified as a P-VOL was a P-VOL of an XP Continuous Access Synchronous
or Asynchronous pair. Because the status of the XP Continuous Access Synchronous pair
was not Suspend, the reverse copy or the quick restore operation was rejected.
235b
The volume specified as a P-VOL was an S-VOL of an XP Continuous Access Synchronous
or Asynchronous pair. Because the status of the XP Continuous Access Synchronous pair
was not Suspend, the reverse copy or the quick restore operation was rejected.
235c
The volume specified as an S-VOL was a P-VOL of an XP Continuous Access Synchronous
or Asynchronous pair. Because the status of the XP Continuous Access Synchronous pair
was not Suspend, the reverse copy or the quick restore operation was rejected.
235d
The volume specified as a P-VOL was a volume of an XP Continuous Access Journal
pair. Because the status of the XP Continuous Access Journal pair was invalid, the pair
operation was rejected.
2060
The volume specified as an S-VOL was a volume of an XP Continuous Access Journal
pair. Because the status of the XP Continuous Access Journal pair was invalid, the pair
operation was rejected.
2061
Because pairs that would exceed the license capacity were going to be created, the
create pair operation was rejected.
232a
The volume specified as an S-VOL was a P-VOL of an XP Continuous Access Synchronous
or Asynchronous pair. Because the status of the XP Continuous Access Synchronous pair
was invalid, the pair operation was rejected.
2346
The volume specified as an S-VOL was an S-VOL of an XP Continuous Access Synchronous
or Asynchronous pair. Because the status of the XP Continuous Access Synchronous pair
was invalid, the pair operation was rejected.
2347
XP Business Copy User Guide 91