HP XP Business Copy Software - Manual (Page 70)

• External Vol: Select available S-VOLs that are external volumes.
NOTE:
You can select external volumes only when External Storage XP is available.
• Attribute: Select available S-VOLs that are reserved when the Reserved check box is selected, or
that are unreserved when the Not Reserved check box is selected. You can also select the pairs
that can be set as L2 pairs when the Pair check box is selected.
NOTE:
The number of secondary volumes that can be displayed in the S-VOL List at one time is limited to
1,024. If the number of volumes defined in the disk array exceeds this limit, use the Previous and
Next buttons on the upper right of the S-VOL List to turn the pages of the S-VOL List and see the entire
list.
• Previous: Returns to the previous page of the S-VOL List. This button is selectable only when the
number of volumes defined in the disk array exceeds 1,024, which is the maximum number of
volumes that can be displayed on one page. The button is unavailable if the total number of
volumes defined in the disk array is less than 1,024 volumes.
• Next: Turn to the next page of the S-VOL List. This button is selectable only when the number of
volumes defined in the disk array exceeds 1,024, which is the maximum number of volumes that
can be displayed on one page. The button is unavailable if the total number of volumes defined
in the disk array is less than 1,024 volumes.
• S-VOL List: Displays the following information related to S-VOLs:
• Port: Port ID (cluster and channel number) of the S-VOL.
• Group (G-ID): Host group ID of the S-VOL.
• S-Vol Path (LUN): CU:LDEV of the S-VOL.
• Pair Num: Number of pairs.
• Type: Emulation type of the S-VOL.
• Capacity (MB): Capacity of the S-VOL in megabytes (MB).
• CLPR: The cache logical partition (CLPR) of the S-VOL.
Buttons
• Set: Adds the selected S-VOL and P-VOL to the Paircreate Volume List as an L1 pair.
• Change: Replaces the existing S-VOL of the selected L1 pair (meaning the S-VOL of the pair after
completing the operation selected in the Paircreate Volume List) with the selected S-VOL.
• Cascade: Adds the selected S-VOL and P-VOL (node volume) to the Paircreate Volume List as a L2
pair. To use the Cascade button, select one of the listed L1 pairs.
• OK: Adds the operation (setting) to create a new pair using the P-VOL and S-VOL selected in the
Paircreate window to the Preset List on the BC main screen.
NOTE:
To apply the new pair operation setting displayed in the Preset List to the disk array, click Apply
on the BC main screen.
Business Copy XP (BC) for the Array 70