HP XP Business Copy Software - Manual (Page 75)

NOTE:
The number of secondary volumes that can be displayed in the S-VOL List at one time is limited to
1,024. If the number of volumes defined in the disk array exceeds this limit, use the Previous and
Next buttons on the upper right of the S-VOL List to turn the pages of the S-VOL List and see the entire
list.
• Previous button: Returns to the previous page of the S-VOL List. This button is selectable only when
the number of volumes defined in the disk array exceeds 1,024, which is the maximum number
of volumes that can be displayed on one page. The button is unavailable if the total number of
volumes defined in the disk array is less than 1,024.
• Next button: Turns to the next page of the S-VOL List. This button is selectable only when the
number of volumes defined in the disk array exceeds 1,024, which is the maximum number of
volumes that can be displayed on one page. The button is unavailable if the total number of
volumes defined in the disk array is less than 1,024.
• The S-VOL List displays the following information related to S-VOLs:
• Port: Port ID (cluster and channel number) of the S-VOL
• Group (G-ID): Host group ID of the S-VOL
• S-Vol Path (LUN): CU:LDEV of the S-VOL
• Pair Num: Number of pairs
• Type: Emulation type of the S-VOL
• Capacity (MB): Capacity of the S-VOL in megabytes (MB)
• CLPR: The cache logical partition (CLPR) of the S-VOL
Buttons
• Set: Adds the selected S-VOL and P-VOL to the Pairsplit Volume List as an L1 pair.
• Change: Replaces the existing S-VOL of the selected L1 pair (that is, the S-VOL of the pair after
completing the operation selected in the Pairsplit Volume List) with the selected S-VOL.
• Cascade: Adds the selected S-VOL and P-VOL (node volume) to the Pairsplit Volume List as an L2
pair. To use the Cascade button, select one of the listed L1 pairs.
• OK: Adds the operation (setting) to split a pair composed of the P-VOL and S-VOL selected in the
Pairsplit window to the Preset List on the BC main screen.
NOTE:
To apply the new setting displayed in the Preset List to the disk array, click Apply on the BC main
screen.
• Cancel: Cancels operations set in the Pairsplit window and closes the Pairsplit window.
To remove any volumes from the Pairsplit Volume List or the S-VOL List, select the volumes, right-click
the selected volumes, and select Delete.
XP Business Copy User Guide 75