HP XP Business Copy Software - Manual (Page 71)

• Cancel: Cancels the operations set in the Paircreate window and closes the Paircreate window.
To remove any volumes from the Paircreate Volume List or S-VOL List, select the volumes, right-click
the selected volumes, and select Delete.
Creating L1 pairs
To create new BC pairs and split them immediately so you can access the S-VOLs as soon as possible,
use the pairsplit operation instead of the paircreate operation (see
Splitting BC pairs (Pairsplit) ).
1. Ensure that the S-VOLs are unmounted.
2. In the BC main screen, select the port, host group, or P-VOL in the Tree View box to filter the
volumes displayed in the Volume list.
3. Select the P-VOLs for the new pairs, right-click the selected P-VOLs, and select Paircreate. The
Paircreate window appears.
NOTE:
Do not select reserved volumes.
4. Set the initial copy pace for all pairs being created: Slower, Medium, or Faster.
5. Verify that the Paircreate window displays the P-VOLs. To remove any volumes from the list, select
the volumes, right-click the volumes, and select Delete.
6. Select the S-VOLs for each P-VOL as follows:
a. Select the P-VOL in the Paircreate window.
b. In the Select MU list, select the MU number for the L1 pair being created: 0, 1, or 2.
c. Select the port in the Port list, select the Reserved check box to display reserved volumes,
and select the S-VOL.
NOTE:
You can select an unreserved volume as the S-VOL. When you create the pair, the disk
array changes the reserve attribute to “reserved” automatically.
d. Click Set to create (add) the S-VOL to the selected P-VOL. The S-VOL is displayed next to the
selected P-VOL.
e. To add a second and third S-VOL to the same P-VOL, repeat step 6b — step 6d. Each pair
to be created is displayed separately in the list of pairs in the Paircreate window.
7. Repeat step 6 until all pairs are displayed. Click Change to replace an S-VOL, click Set to add
an S-VOL, and use the Delete command to remove pairs.
8. When the Paircreate window displays the new pairs, click OK to reflect all pairs (settings) in the
list to the Preset Volume list on the BC main screen.
9. From the BC main screen, click Apply to create the pairs.
When the initial copy operations start, the BC main screen shows new pairs with COPY(PD) status
and progress (%) of the initial copy operations.
10. Click Refresh ( ) to monitor the progress of the initial copy operations.
XP Business Copy User Guide 71