HP StorageWorks XP Remote Web Console Software - Manual (Page 162)

NOTE:
◦ You can specify the Timer Type option only when no journal volume is registered. If journal
volumes are already registered, you cannot specify the Timer Type option.
◦ Ensure that the same timer type is specified in both the primary and the secondary sites.
◦ When you use Fujitsu OS, select Local in Timer Type.
•
JNL Group: Indicates the number of a journal group.
•
Current: Indicates the number and the capacity of journal volumes that currently exist in the
journal group.
NOTE: If the number of journal volumes is 0, the capacity does not display.
•
Total: Estimates the number and the capacity of journal volumes after addition or deletion,
and then displays the estimated number and the capacity.
NOTE: If the number of journal volumes is 0, the capacity does not display.
•
Set: Applies the settings in the window to the Journal Operation window ( “Journal Operation
Window” (page 108) ).
•
Cancel: Cancels the settings.
Deleting Journal Volumes from a Journal Group
To delete journal volumes from the primary storage system, log into the primary storage system
and then perform the following operation.
To delete journal volumes from the secondary storage system, log into the secondary storage system
and then perform the following operation.
1. Ensure that the Remote Web Console main window is in Modify mode.
For detailed information about how to do this, see the HP XP24000/XP20000 Remote Web
Console User's Guide.
2. Ensure that the Journal Operation window is displayed.
3. In the tree of the Journal Operation window, select a journal group from below Registered.
You cannot select more than one journal group.
162 Configuring Journal Groups