HP StorageWorks XP Remote Web Console Software - Manual (Page 149)

◦ Port: indicates a port on the local storage system
◦ Pair-Port: indicates a port on the remote storage system.
•
S/N: Indicates the serial number and LDKC number of the remote storage system.
•
Controller ID: Displays the controller ID (model name that indicates the model) of the remote
storage system.
•
Path Gr. ID: Indicates a path group ID.
•
M-R Path: Indicates the type of channel interface between the local and the remote storage
systems. This column displays fibre.
•
Minimum Paths: Indicates the minimum possible number of paths between the local and the
remote storage systems.
•
RIO MIH Time: Indicates the RIO MIH (remote I/O missing interrupt handler) timer value, which
is the wait time until data transfer from the local storage system to the remote storage system
is complete.
•
DKC Registered: Indicates the date and time when the local and the remote storage systems
are associated with each other.
•
Last Updated: Indicates the date and time when the last operation on a logical path to the
remote storage system was performed.
•
Refresh the DKC Operation tab after this panel is closed: If you select this check box, information
in the DKC Operation window will be refreshed after you close the DKC Status window.
•
Refresh: Refreshes the information in the DKC Status window.
•
Close: Closes the DKC Status window.
Table 38 Logical Path Status
Remarks Status
This path has been successfully established and can be used for Universal Replicator
for Mainframe remote copy activities. Normal
An operation for configuring or deleting this logical path is in progress. Nothing
An error occurred with the initialization of a connection between the local and the
remote storage system. The probable causes are: Initialization Failed
•
No cable is connected to the local storage system.
•
No cable is connected to the remote storage system.
• No cable is connected to the network device that comes between the local and
the remote storage system.
This indicates one of the following statuses: Communication Time
Out
•
A timeout error has occurred between the primary and the secondary storage
systems.
•
A logic error is detected between the primary and the secondary storage systems.
The local storage system rejected the function for configuring a logical path
connection. All logical path resources in the local storage system might be used
for other connections. Resource Shortage
(Port)
The remote storage system rejected the function for configuring a logical path
connection. All logical path resources in the remote storage system might be used
for other connections. Resource Shortage
(Pair-Port)
The serial number of the storage system connected to this logical path does not
match the serial number specified by the Add DKC window. Serial Number
Mismatch
The port is not an initiator port. Invalid Port
Viewing the Status of Logical Paths 149