HP StorageWorks XP Remote Web Console Software - Manual (Page 126)

Table 35 Operations Displayed in the History Window (continued)
Descriptions Displays
The status of the data volume pair was changed from Suspend to Simplex because
of an operation from the primary storage system. Status Change by MCU(Suspend to
Simplex)
The status of the data volume pair was changed from Suspend to Pending because
of an operation from the primary storage system. Status Change by MCU(Suspend to
Pending)
The status of the data volume pair was changed from Duplex to Pending because
of an operation from the primary storage system. Status Change by MCU(Duplex to
Pending)
The status of the data volume pair was changed because an operation for splitting
a pair started at the secondary storage system. Status Change by RCU(Suspend Pair
Start)
The status of the data volume pair was changed because an operation for splitting
a pair finished at the secondary storage system. Status Change by RCU(Suspend Pair
Complete)
An operation for releasing a pair has been started at the secondary storage system.
The status of the data volume pair will change from Suspend to Simplex. Status Change by RCU(Suspend to
Simplex; Delete Pair Start)
An operation for releasing a pair has been started at the secondary storage system.
The status of the data volume pair will change from Pending to Simplex. Status Change by RCU(Pending to
Simplex; Delete Pair Start)
An operation for releasing a pair has been started at the secondary storage system.
The status of the data volume pair will change from Duplex to Simplex. Status Change by RCU(Duplex to
Simplex; Delete Pair Start)
The status of the data volume pair was changed because an operation for releasing
a pair finished at the secondary storage system. Status Change by RCU(Delete Pair
Complete)
A data volume pair became ready for delta resync. Ready for Delta resync
The failure occurred with the data volume pair that was ready for delta resync. Ready for Delta resync(Failure)
The status of the primary data volume was changed to Hold because of a delta
resync operation. Status Change for Delta resync
The status of the data volume pair was changed from Simplex to Hold because of
an operation from the primary storage system. Status Change by MCU(Simplex to
Hold)
The status of the data volume pair was changed from Hold to Duplex because of
an operation from the primary storage system. Status Change by MCU(Hold to
Duplex)
The status of the data volume pair was changed from Hold to Pending because of
an operation from the primary storage system. Status Change by MCU(Hold to
Pending)
The status of the data volume pair was changed from Hold to Simplex because of
an operation from the primary storage system. Status Change by MCU(Hold to
Simplex)
An operation for releasing a pair has been started at the secondary storage system.
The status of the data volume pair will change from Hold to Simplex. Status Change by RCU(Hold to
Simplex; Delete Pair Start)
The status of the secondary data volume was changed to Hold because of a delta
resync operation. Status Change to Hold
The storage system could not identify the type of operation. Unknown
126 Using the Universal Replicator for Mainframe GUI