HP StorageWorks XP Remote Web Console Software - Manual (Page 164)

3. Do either of the following:
•
In the tree, right-click the selected journal group and then select JNL Groups and JNL
Status from the pop-up menu.
•
In the upper-right list, right-click the desired journal group and then select JNL Groups
andJNL Status from the pop-up menu.
4. In the JNL Group Detail window ( Figure 73 (page 164) ), view detailed information about the
journal group.
5. After you finish viewing the information, click Close to close the JNL Group Detail window.
Figure 73 JNL Group Detail Window
The JNL Group Detail window displays the following settings:
•
JNL Group(LDKC): Indicates the number of a journal group and the LDKC number. The LDKC
number is enclosed in parentheses following the serial number.
•
Attribute: Indicates the attribute of the journal group. When one journal group uses multiple
mirror IDs, Attribute indicates the attribute of the data volume in the journal group whose
mirror ID is not Hold, Holding, or Hold(Failure).
In the case of a master journal group, Attribute indicates Master. In the case of a restore
journal group, the display will be Restore. If Attribute indicates Initial, it means that journal
volumes are registered in this journal group, but no data volumes (primary data volumes nor
secondary data volumes) are registered in this journal group. When neither journal volumes
nor data volumes are registered, Attribute indicates nothing.
164 Configuring Journal Groups