HP StorageWorks XP Remote Web Console Software - Manual (Page 201)

9. See the Preview list in the Pair Operation window to check the settings that you have made.
•
To modify a setting, select and right-click the setting and then select Modify.
•
To cancel a setting, select and right-click the setting and then select Cancel.
10. Click Apply to restore the pair(s).
NOTE: If an error occurs, the right-most column of the Preview list displays the error code.
To view detailed information about the error, right-click the error code and then select Error
Detail. An error message appears and gives you detailed information about the error.
11. In the list of the Pair Operations window, verify that the pair has been restored successfully.
If the pair has been restored successfully.
•
If the pair has been restored successfully, the status of the pair is Pending or Duplex.
•
If the delta resync operation has been performed successfully, the status of the pair is
Pending or Duplex.
•
If the operation to change pair status has been performed successfully, the status of the
pair changes to Hold or Holding.
12. To monitor the progress of restoring pair(s), click File, Refresh on the menu bar of the Remote
Web Console main window to update the information in the list, or use the Detailed Information
window to monitor the detailed status of each pair.
Figure 84 Resume Pair Window
The Resume Pair window displays the following settings:
•
Range: Allows you to specify the restore range. The default is Volume if two or more pairs in
the same mirror are selected. The default is Group if not. Note that the default setting is Group
when the pair status is Hold , Holding, or Hlde, and in that case you cannot change the default
setting.
◦ Volume: Only the specified pair(s) will be restored.
◦ Group: All pairs in the same mirror(s) as the selected pair(s) will be restored.
If the following two conditions are satisfied and you click Apply, a warning message will be
displayed and processing cannot be continued:
◦ The Preview list contains two or more pairs belonging to the same mirror.
◦ The Range column displays Group for at least one of the above pairs.
Restoring a Pair of Data Volumes 201