HP StorageWorks XP Remote Web Console Software - Manual (Page 38)

Description Item
Do not use a number that is already in use as a pool ID
number.
Select the pool usage warning threshold, which is specified
as a percentage. The range can be between 5 and 95.
The default value is 70.
If the pool usage level exceeds the threshold, the pool status
changes to Warning status, when the pool is in Warning Threshold
status, additional pool volumes should be added to the
pool.
XP Thin Provisioning should already be selected. Attribute
Creates the new pool and closes the dialog box. The setting
will not be implemented until you click Apply on the Pool
window. Set
Cancels the settings and closes the dialog box. No pool
will be created. Cancel
Change Pool Information Dialog Box
Access the Change Pool Information dialog box by right-clicking the selected pool, then selecting
Change Pool Information from the pop-up menu.
Figure 17 Change Pool Information Dialog Box
The features of the Change Pool Information dialog box are the same as those for the New Pool
dialog box, except that only the Threshold field is available.
New V-VOL Group Dialog Box
Figure 18 New V-VOL Group Dialog Box
Description Item
Select the V-VOL group ID using numbers from 1 to 65,535.
Do not use a number that is already in use as a V-VOL
group ID. V-VOL Group
Select the emulation type. Open-V is the only type that is
supported. Emulation Type
38 Using the XP Thin Provisioning GUI