HP XP Continuous Access Software - Manual (Page 133)

The Operation list shows the following information:
Description Item
Lists the remote storage systems of each LDKC in the local
storage system. The following information appears to the
right of the icon of the remote storage system:
•
Controller ID of the remote storage system. The model
name of the remote storage system.
•
Serial number of the remote storage system
•
Path group ID
Note: The LDKC#01 cannot be used in this version of XP
Continuous Access Journal.
The icon indicates the status of logical paths between the
local storage system and the remote storage system:
• All logical paths are in normal status.
• A failure occurred at some of the logical paths.
Tree
Shows information about the selected remote storage
system:
•
Controller ID: The controller ID and the model name of
the storage system of a remote storage system. The
controller ID for an XP24000/XP20000 Disk Array is
5. The model name of an XP24000/XP20000 Disk
Array is XP24000/XP20000 Disk Array.
The icon indicates the status of logical paths between
the local storage system and the remote storage system:
◦ All logical paths are in normal status.
◦ A failure occurred at some of the logical paths.
•
S/N (LDKC): The five-digit serial number and the LDKC
number of the remote storage system. When the remote
storage system is an XP12000/XP10000 Disk Array
or USP V/VM, 00 appears as the LDKC number.
• Path Gr. ID: The path group ID. All path group IDs show
as Default.
Note: In the current version, the path group ID is set to
the default value.
• M-R Path: The channel type of the logical paths between
the local storage system and the remote storage system.
This column always shows Fiber.
•
Status: Indicates whether logical paths fail.
Normal: No failure occurs to the logical paths.
Failed: All the logical paths fail.
Warning: Some of the logical paths fail.
• Num of Path: The number of logical paths.
Operation List
Viewing Information about Logical Paths
Logical paths are communications paths that connect the local storage system ports and the remote
storage system ports.
To view information in the DKC Operation window about logical paths:
DKC Operation Window 133