Viewing the status of logical paths – HP XP Continuous Access Software User Manual
Page 152
Figure 70 Add Path Window
The Add Path window shows the following:
•
Port: Select an initiator port on the local storage system.
When specifying a port, you can use the keyboard to enter the port number. When you enter
the port number, you can abbreviate the port number to two characters. For example, you
can enter 1A instead of CL1-A. You can use uppercase and lowercase letters.
•
Pair-Port: Select an RCU target port on the remote storage system.
When specifying a port, you can use the keyboard to enter the port number. When you enter
the port number, you can abbreviate the port number to two characters. For example, you
can enter 1A instead of CL1-A. You can use uppercase and lowercase letters.
•
Set: Closes the Add Path window and adds the settings to the Preview list.
•
Cancel: Cancels the settings and closes the window.
Viewing the Status of Logical Paths
The DKC Status window (see
) shows the status of the logical path(s).
To view the status of the logical path(s), follow the described in this section. The primary storage
system administrator and the secondary storage system administrator can perform this operation.
1.
Ensure that the DKC Operation window is open (see
“DKC Operation Window” (page 130)
).
2.
In Display, select DKC.
152
Configuring Storage Systems and Logical Paths